Skip to content
WattsBack

Water heater, no hot water

A gas smell, a carbon monoxide alarm or a leaking tank means act now. For an electric heater, check whether the breaker tripped once. Gas heaters and anything inside the unit are for a licensed professional.

Photograph of a plain white tank water heater with copper pipes in a tidy utility closet
On this page

A cold shower is annoying, but a water heater is also a gas appliance, an electrical appliance and a tank of hot water all at once. So this page puts the dangerous situations ahead of the fix, and keeps the fix to one safe check.

Water heater, no hot water

Safety questions first, then the one check a homeowner can make. Gas water heaters and anything inside the unit are for a licensed pro.

Do you smell gas, or has a carbon monoxide alarm sounded?

I smell gas

Act now

Leave now and call for help

A gas smell near a water heater can mean a leak. Do not relight the pilot or check the unit.

What to do

  1. Leave the home now with everyone in it, and keep pets with you if you can do that quickly.
  2. Do not turn lights or appliances on or off, use a lighter or match, or try to find the leak.
  3. From outside, call 911 and your gas utility's emergency number.
  4. Stay out until the utility or the fire department says it is safe.
A CO alarm sounded or someone feels sick

Act now

Get into fresh air and call emergency services now

Fuel-burning appliances such as gas water heaters can release carbon monoxide if they are not venting properly.

What to do

  1. Get everyone, including pets, into fresh air now. Open the door on your way out.
  2. Call 911 from outside. Symptoms can look like the flu: headache, dizziness, weakness, nausea or confusion.
  3. Do not go back in to switch the appliance off. Wait for the fire department or a gas utility technician to say it is safe.
  4. Have the appliance inspected by a qualified technician before it runs again.
Neither

Is water leaking from the tank, especially from the bottom?

Yes

Act now

Call a licensed plumber now

Water leaking from the bottom of the tank usually means a cracked tank. These generally can't be repaired and the heater needs replacing.

What to do

  1. Stay out of standing water and don't touch wet electrical equipment or the panel.
  2. Call a licensed plumber now. Call your utility, or dial the emergency number if water reaches electrical equipment.
  3. Don't try to patch the tank. Ask the plumber about replacing it.
No

Is the water heater electric or gas?

Check the label or ask your landlord. Gas units have a flue or vent pipe on top.

Electric

Did the water heater's breaker trip?

Check the panel only if you can reach it safely and dry.

Yes, I switched it off and back on once and the water heats

Keep an eye on it

Give it time, and watch it

A tripped breaker is one of the common reasons an electric water heater stops heating. It can take a while to heat a full tank again.

What to do

  1. Wait for the tank to reheat before you judge.
  2. Check the temperature setting while you wait. DOE recommends 120 degrees F.
  3. If it trips again, stop and call a licensed electrician or plumber.
Yes, and it trips again

Act now

Stop resetting it and call a licensed professional now

A breaker that trips again means a fault in the heater or its circuit.

What to do

  1. Leave the breaker off.
  2. Call a licensed electrician or plumber now.
  3. If you smell burning or see smoke, leave and call 911.
No, the breaker is on

Deal with it soon

Call a licensed plumber or electrician

If the breaker is on, the usual causes are a tripped high-temperature limit, a failed thermostat or a bad heating element. All three are inside the unit, behind covers with live wiring.

What to do

  1. Don't remove covers or touch wiring.
  2. Tell the professional what you saw and whether any hot water comes out at all.
  3. Keep the setting at 120 degrees F and no higher, to avoid scalding.
Gas

Deal with it soon

Call a licensed technician for a gas water heater

Gas water heaters usually need a service technician. Relighting a pilot or touching gas parts is not a homeowner job on this site.

What to do

  1. See your manual for the manufacturer's instructions. Don't open gas lines or work on gas parts.
  2. Call a licensed plumber or heating technician.
  3. If you smell gas at any time, go back to the top of this tree: leave and call for help.
I don't know

Deal with it soon

Find out the fuel type, then come back

The checks differ for electric and gas heaters, and the gas ones need a professional.

What to do

  1. Read the label on the tank, or ask your landlord or a plumber.
  2. Treat it as gas until you know. Don't open covers or touch wiring.
  3. Come back to this tree once you know.

The order of the questions

First comes gas or carbon monoxide: the CDC lists fuel-burning appliances as sources of carbon monoxide, and asks for a qualified technician to service the heating system, water heater and other fuel-burning appliances every year. A gas smell or an alarm ends the tree with leave and call for help.

Second is a leak. Sears Home Services notes that water leaking from the bottom of the tank usually means a cracked tank, which generally cannot be repaired and needs replacement. The tool treats a leaking tank as an act-now result because of the water damage and the risk if water reaches electrical equipment.

Third is the fuel. The Sears article says gas water heaters usually need a service technician, and this site goes further and does not describe any work on gas parts or pilot lights. For an electric heater, the first check it names is the breaker: switch it off and on once. If the heater heats again, it needs time to reheat the tank. If the breaker trips again, the result is to leave it off and call a licensed electrician or plumber now.

If the breaker is on, the usual causes are a tripped high-temperature limit, a failed thermostat or a bad heating element. All of those are inside the unit behind covers with live wiring, so the tool sends you to a professional rather than walking you through them.

The temperature setting

The Department of Energy recommends a water heater setting of 120 degrees F, which saves energy and lowers scalding risk. If you are checking the setting while the heater is out, do not raise it to speed things up.

Worked example

Lena has no hot water. She smells no gas and no alarm has sounded, and there is no puddle under the tank. The heater is electric. In the panel, the water heater's breaker is in the off position, so she flips it off and on once, as the tool says, and waits. After a wait the water is warm. The tool ends with a watch result: keep an eye on it, check the setting and call a pro if it trips again. Her neighbor has a gas heater and answers gas, and the tool sends him to a licensed technician with the instruction not to open gas lines or touch the pilot.

Renting

Report it to the landlord at once and keep a record. The renter's repair request letter covers heating and cooling, and the same wording works for hot water. A leak or gas smell is an emergency call, not a letter.

In a camper or motorhome

RV water heaters work differently and burn propane inside the vehicle. Use RV water heater not working instead.

Sources

  1. Sears Home Services, Water heater problems and troubleshooting searshomeservices.com
  2. U.S. Department of Energy, Energy Saver Guide (2022) energy.gov
  3. Centers for Disease Control and Prevention, About carbon monoxide cdc.gov
  4. U.S. Consumer Product Safety Commission, Carbon Monoxide Information Center cpsc.gov