Skip to content
WattsBack

Mini-split not cooling

Burning smells, sparking or a breaker that keeps tripping mean switch off and call a licensed pro. Otherwise check the remote mode, clean the filters, clear the outdoor unit and look for ice, and leave refrigerant to a technician.

Photograph of a white wall-mounted mini-split unit above a linen sofa in a bright room
On this page

A mini-split can run for hours, hum, move air and still leave the room warm. People search for this as "split AC not cooling but fan is running", and it describes exactly what happens: the indoor fan is the easy part to see, but cooling depends on the outdoor unit and on refrigerant. This page helps you check what you can reach, and shows when the fan is only a sign that something else has stopped.

Mini-split not cooling

For a ductless mini-split whose indoor fan runs but whose air is not cool. Electrical warning signs first, then the remote, the filters and the outdoor unit. Refrigerant is only for a trained technician.

Any burning smell, smoke or sparking, or a breaker that keeps tripping?

Yes, one of those

Act now

Turn it off and call a licensed professional now

Burning smells, sparking and a breaker that will not stay reset point to an electrical fault.

What to do

  1. If you see smoke or flames, or the smell is strong, leave the home and call 911.
  2. Otherwise switch the equipment off at the thermostat and leave any breaker that tripped off. Do not keep resetting it.
  3. Call a licensed HVAC professional or electrician now. Do not open panels or touch wiring.
No

On the remote or app, is the unit set to cool with the target several degrees below the room temperature?

Fan, dry and auto modes can all blow air that is not much cooler than the room, and someone else may have changed the setting.

No, the mode or target was wrong and I changed it

Keep an eye on it

Give it a few minutes, then watch it

Wrong mode or a target close to the room temperature is a leading reason for a unit that runs without cooling.

What to do

  1. Wait several minutes and feel the air at the indoor unit.
  2. If it is still not cool, come back and answer the next questions.
Yes, it is set to cool

Are the indoor unit's filters clean?

Switch the unit off first. Wash a dirty filter, let it dry completely and refit it before you restart.

No, they were dirty and I cleaned them

Keep an eye on it

Restart it and watch it

Clogged filters starve the indoor coil of air, which weakens cooling and can lead to a frozen coil.

What to do

  1. Restart the unit in cool mode and wait several minutes.
  2. If you see frost or ice on the indoor unit, switch it off to thaw and call a technician.
  3. If cooling does not improve, answer again from the top.
Yes, they are clean

Look at the outdoor unit. Is it clogged with leaves or debris, crowded by shrubs, or not running at all?

Switch the system off before you clear anything, and keep your hands out of the unit.

Leaves, debris or shrubs are against it

Keep an eye on it

Clear the unit, then watch it

A blocked outdoor unit cannot shed heat, so cooling drops and the unit can shut down to protect itself.

What to do

  1. Switch the system off, then clear leaves and twigs from the intake and cut shrubs back so there is open space around the unit.
  2. Restart cooling and give it time.
  3. If it still does not cool, call an HVAC technician.
The indoor fan runs, but the outdoor unit and its fan are still

Deal with it soon

Turn it off and call an HVAC technician

An indoor fan running while the outdoor unit stays still means no heat is leaving the house. The cause is an electrical part, a control fault or the compressor, and none of that is homeowner work.

What to do

  1. Switch the unit off at the remote, so it is not running for nothing.
  2. Call a licensed HVAC technician and say the outdoor unit is not starting.
  3. Do not open either unit or touch wiring.
It is running and clear

Is there frost or ice on the indoor unit or the refrigerant lines, or water running out of the indoor unit?

Yes

Deal with it soon

Turn it off to thaw, then call a technician

Ice means the coil has frozen. A dirty coil, a dirty filter or low refrigerant can each cause it, and the repair is a technician's.

What to do

  1. Switch cooling off so the ice can thaw, and catch any meltwater with towels, away from electrical outlets.
  2. Call a licensed HVAC technician. Do not run the unit frozen.
  3. Do not chip at the ice.
No

Deal with it soon

Turn it off and call an HVAC technician

When the settings, filters and outdoor unit are fine and the unit runs without cooling, low refrigerant from a leak is the usual cause, or a worn part. Only a trained technician may find, repair or recharge a refrigerant leak.

What to do

  1. Switch the unit off, since running it low on refrigerant does not help and can damage it.
  2. Call a licensed HVAC technician and say what you checked.
  3. If the unit is under warranty, start with the installer.

Electrical warning signs first

Mini-splits are electrical equipment installed through a wall, usually with their own breaker. The tool therefore asks first about burning smells, smoke, sparking and a breaker that keeps tripping. If any applies, it ends in an act-now result: switch the unit off at the remote, leave the breaker off, call a licensed HVAC professional or electrician and stay away from wiring. With smoke or flames, leave and call 911.

Settings that fool you

Trane's help page starts with the remote or app: confirm the unit is set to cool and that the target is several degrees below the room temperature. A fan mode, a dry mode or a target close to the room temperature will move air that feels flat. Because remotes are shared and easy to bump, someone else may have changed it.

Filters and the outdoor unit

Dirty indoor filters cut airflow across the indoor coil. Switch the unit off, clean the filters, let them dry completely and refit them before restarting. Then look at the outdoor unit. Leaves, twigs and neighboring shrubs can choke its air intake, and an outdoor unit that cannot release heat cannot cool the room. Clear the intake with the system off, and cut shrubs back so there is open space around the cabinet.

A telling clue is the outdoor unit itself. If the indoor fan runs while the outdoor unit and its fan stay still, no heat is leaving the room, which is the typical "fan is running but not cooling" case. That is a technician call: the cause could be an electrical component, a control fault or the compressor.

Ice, water and refrigerant

Frost on the indoor unit or the lines, or water running out of the indoor unit, means the coil has frozen. Trane lists a dirty coil, dirty filters and a refrigerant leak as causes. Switch cooling off to let it thaw. If settings, filters and the outdoor unit are all fine and the unit still runs without cooling, low refrigerant from a leak is the usual explanation. Finding and repairing a leak and recharging the system are work for a trained technician only, and the manufacturer recommends yearly service on cooling-only units. DOE's heating and cooling guide adds that regular maintenance can reduce heating and cooling costs by 10% or more.

Worked example

Beatriz moved into a flat with a wall-mounted mini-split. On a warm evening the indoor fan hums but the room does not cool. The tool begins with the electrical questions, and none applies. The remote says dry mode, which she switches to cool with a target several degrees lower. A while later it is no better. The filters are dusty, so she cleans and dries them. The outdoor unit sits behind a shrub with leaves packed against the grille, and the fan is still. Because it is not moving, the tool sends her to a technician rather than another round of checks.

Renting

Mini-splits are usually part of the unit, so repair is typically the landlord's. Photograph the unit's settings and the outdoor unit, describe what you checked and send the renter's repair request letter.

For a central air conditioner, use AC blowing but not cooling. If you found ice, see AC freezing up. The summer bill reduction checklist helps keep cooling costs down.

Sources

  1. Trane, Mini-split not cooling (help page) trane.com
  2. U.S. Department of Energy, Consumer Guide to Home Heating and Cooling energy.gov
  3. U.S. Consumer Product Safety Commission, Carbon Monoxide Information Center cpsc.gov