Skip to content
WattsBack

Bradford White heat pump water heater error codes

Bradford White heat pump water heater code 11: airflow restriction, dirty air filter

The coil inside the heat pump is running colder than the room air around it, which tells the control that airflow is restricted, usually by a dirty air filter. The heater switches to electric only heating until the filter is cleaned and the alarm is reset.

Photograph of a plain white tank water heater with copper pipes in a tidy utility closet
On this page
Code
11
Equipment
Bradford White heat pump water heater
Models
AeroTherm Series hybrid electric heat pump water heaters
What to do
Often an owner fix

What code 11 means

Bradford White's Installation and Operation Manual - Hybrid Electric Heat Pump Water Heater (238-55123-00) lists 11 as airflow restriction, dirty air filter, for the AeroTherm Series hybrid electric heat pump water heaters. Faults show as a numbered fault code on the control panel screen, from 1 up to 99, and some come with an audible alarm.

What usually causes it

The manual points to these causes for this code, roughly in the order a technician would rule them out:

  • The air filter on top of the heater is clogged with dust.
  • Ducting that is longer than the manual allows starves the heater of air and can set off dirty filter faults.
  • If the code returns within a few days of cleaning, something else is limiting airflow and a technician needs to look.

What you can safely check

  1. Clean the heat pump's air filter. A hybrid water heater pulls room air through an air filter, and a clogged filter starves the heat pump of air. Your manual says how to clean it: some filters are washed with mild soap and water and left to dry, others are vacuumed or replaced.
  2. Write the code down before you reset. Many controls forget the code once power is cut. Note it, how often it flashes, and when it happens. A technician can then go straight to the right part.

When to call a technician

Call if the code returns after one reset, if you saw or smelled anything unusual, or as soon as a check above points at a part inside the unit. Tell the technician the brand, the model number from the rating label, and that the control showed code 11 (the manual's first suspect is the air filter on top of the heater is clogged with dust). That saves a diagnostic visit from starting at zero.

Step by step for this kind of problem

The Water heater, no hot water troubleshooter walks through the symptom question by question and ends with a clear next step.

Other Bradford White heat pump water heater codes

The full Bradford White heat pump water heater code table lists every code with its meaning, and explains how to read and clear them.

Sources

  1. Bradford White, Installation and Operation Manual - Hybrid Electric Heat Pump Water Heater (238-55123-00) docs.bradfordwhite.com
  2. Bradford White, Quick Service Guide / Service Manual Supplement - Heat Pump Water Heaters AeroTherm Series (238-55219-00) docs.bradfordwhite.com
  3. Noritz, How to troubleshoot a tankless water heater noritz.com