Skip to content
WattsBack

A.O. Smith power vent gas water heater error codes

A.O. Smith power vent gas water heater code 12: temperature button stuck

The control's self check thinks one or both of the COOLER and HOTTER buttons are held down. It flags the fault because a stuck button could change the water temperature setting.

Photograph of a plain white tank water heater with copper pipes in a tidy utility closet
On this page
Code
12
Equipment
A.O. Smith power vent gas water heater
Models
Residential power direct vent gas water heaters, 40, 50 and 75 gallon models
What to do
Often an owner fix

What code 12 means

A.O. Smith's Instruction Manual - Residential Gas Water Heaters, Power Direct Vented Models, incl. error codes (185884-001) lists 12 as temperature button stuck, for the Residential power direct vent gas water heaters, 40, 50 and 75 gallon models. The gas control valve on the front of the tank signals a fault with its LED lights. The manual numbers the faults 1 to 16 and pictures the LED pattern for each one in its troubleshooting chart.

What usually causes it

The manual points to these causes for this code, roughly in the order a technician would rule them out:

  • One or both temperature buttons are physically stuck.
  • The gas control is faulty, if the code keeps coming back.

What you can safely check

  1. Reset it once. Turn the unit off at its switch, wait a minute, and turn it back on, or use the reset the manual describes. One reset clears a passing glitch. If the same code comes back, stop resetting and book a technician.
  2. Write the code down before you reset. Many controls forget the code once power is cut. Note it, how often it flashes, and when it happens. A technician can then go straight to the right part.

When to call a technician

Call if the code returns after one reset, if you saw or smelled anything unusual, or as soon as a check above points at a part inside the unit. Tell the technician the brand, the model number from the rating label, and that the control showed code 12 (the manual's first suspect is one or both temperature buttons are physically stuck). That saves a diagnostic visit from starting at zero.

Step by step for this kind of problem

The Water heater, no hot water troubleshooter walks through the symptom question by question and ends with a clear next step.

Other A.O. Smith power vent gas water heater codes

The full A.O. Smith power vent gas water heater code table lists every code with its meaning, and explains how to read and clear them.

Sources

  1. A.O. Smith, Instruction Manual - Residential Gas Water Heaters, Power Direct Vented Models, incl. error codes (185884-001) assets.aosmith.com
  2. Noritz, How to troubleshoot a tankless water heater noritz.com