Navien combi boiler error codes
Navien combi boiler code E740: outdoor reset sensor fault
With outdoor reset turned on, which raises or lowers heating temperature with the weather, the outdoor sensor is not reading properly.

On this page
- Code
- E740
- Equipment
- Navien combi boiler
- Models
- NCB-E condensing combi boilers: NCB-150E, 180E, 210E, 240E
- What to do
- Technician repair
What code E740 means
Navien's User's Information Manual - NCB-E Condensing Combi-Boilers lists E740 as outdoor reset sensor fault, for the NCB-E condensing combi boilers: NCB-150E, 180E, 210E, 240E. The combi boiler shows an E and three digits on its front display while the error icon lights. In normal running the same display instead alternates between supply water temperature and system pressure.
What usually causes it
The manual points to these causes for this code, roughly in the order a technician would rule them out:
- An outdoor reset curve that is not set up correctly.
- A loose or faulty wiring connection to the outdoor sensor.
What you can safely check
- Write the code down before you reset. Many controls forget the code once power is cut. Note it, how often it flashes, and when it happens. A technician can then go straight to the right part.
- Reset it once. Turn the unit off at its switch, wait a minute, and turn it back on, or use the reset the manual describes. One reset clears a passing glitch. If the same code comes back, stop resetting and book a technician.
When to call a technician
Call if the code returns after one reset, if you saw or smelled anything unusual, or as soon as a check above points at a part inside the unit. Tell the technician the brand, the model number from the rating label, and that the control showed code E740 (the manual's first suspect is an outdoor reset curve that is not set up correctly). That saves a diagnostic visit from starting at zero.
Step by step for this kind of problem
The Tankless water heater, no hot water troubleshooter walks through the symptom question by question and ends with a clear next step.
Related Navien codes
Other Navien combi boiler codes
- E003
- E004
- E012
- E016
- E030
- E046
- E047
- E060
- E109
- E110
- E205
- E218
- E351
- E352
- E353
- E407
- E421
- E439
- E515
- E517
- E594
- E615
- E736
- E777
- E782
The full Navien combi boiler code table lists every code with its meaning, and explains how to read and clear them.