Trane gas furnace error codes
Trane gas furnace code E11: gas valve stage fault
The control found that a gas valve stage is powered when it should be off, or unpowered when it should be on. It treats this as a gas valve circuit fault and will not run the burner normally.

On this page
- Code
- E11
- Equipment
- Trane gas furnace
- Models
- S9X2 two-stage condensing gas furnaces; also S8X2 two-stage 80% furnaces
- What to do
- Turn it off and call a pro
What code E11 means
Trane's Product Data - S9X2 Two Stage Condensing Gas Fired Furnace, incl. error code list (22-1930-1G-EN) lists E11 as gas valve stage fault, for the S9X2 two-stage condensing gas furnaces; also S8X2 two-stage 80% furnaces. A small digital display on the integrated furnace control (IFC) shows a short status word, such as Ht1 while heating, and switches to a code starting with E when it finds a fault, for example E04 or E2.1.
What usually causes it
The manual points to these causes for this code, roughly in the order a technician would rule them out:
- The first-stage gas valve did not get power when the control called for it.
- The relay for the first stage of the gas valve is stuck closed.
- The relay for the second stage of the gas valve is stuck closed.
- The second stage of the valve is powered when it should be off.
- The second stage of the valve is not powered when it should be on.
What you can safely check
- Write the code down before you reset. Many controls forget the code once power is cut. Note it, how often it flashes, and when it happens. A technician can then go straight to the right part.
When to call a technician
Call if the code returns after one reset, if you saw or smelled anything unusual, or as soon as a check above points at a part inside the unit. Tell the technician the brand, the model number from the rating label, and that the control showed code E11 (the manual's first suspect is the first-stage gas valve did not get power when the control called for it). That saves a diagnostic visit from starting at zero.
Step by step for this kind of problem
The Furnace not working troubleshooter walks through the symptom question by question and ends with a clear next step.
Related Trane codes
Other Trane gas furnace codes
The full Trane gas furnace code table lists every code with its meaning, and explains how to read and clear them.