Skip to content
WattsBack

A.O. Smith heat pump water heater error codes

A.O. Smith heat pump water heater code Heat Pump Low Pressure Fault: refrigerant pressure too low

The low pressure switch in the refrigerant circuit opened because suction pressure dropped too far. The compressor is kept off until pressure recovers.

Photograph of a plain white tank water heater with copper pipes in a tidy utility closet
On this page
Code
Heat Pump Low Pressure Fault
Equipment
A.O. Smith heat pump water heater
Models
PHPT-60 and PHPT-80 hybrid electric heat pump water heaters
What to do
Often an owner fix

What code Heat Pump Low Pressure Fault means

A.O. Smith's Service Handbook - Residential Hybrid Electric Heat Pump Water Heater, incl. fault codes (321547-000) lists Heat Pump Low Pressure Fault as refrigerant pressure too low, for the PHPT-60 and PHPT-80 hybrid electric heat pump water heaters. Faults show as a text message on the touch display on the front of the heater. The exact fault name is kept in a maintenance screen as codes E01 to E04, newest first.

What usually causes it

The manual points to these causes for this code, roughly in the order a technician would rule them out:

  • Poor airflow across the evaporator from a dirty air filter or a dusty evaporator.
  • The refrigerant charge is low.
  • Something is blocking the refrigerant circuit.
  • The low pressure switch is faulty, if system pressures check good.

What you can safely check

  1. Clean the heat pump's air filter. A hybrid water heater pulls room air through an air filter, and a clogged filter starves the heat pump of air. Your manual says how to clean it: some filters are washed with mild soap and water and left to dry, others are vacuumed or replaced.
  2. Write the code down before you reset. Many controls forget the code once power is cut. Note it, how often it flashes, and when it happens. A technician can then go straight to the right part.

When to call a technician

Call if the code returns after one reset, if you saw or smelled anything unusual, or as soon as a check above points at a part inside the unit. Tell the technician the brand, the model number from the rating label, and that the control showed code Heat Pump Low Pressure Fault (the manual's first suspect is poor airflow across the evaporator from a dirty air filter or a dusty evaporator). That saves a diagnostic visit from starting at zero.

Step by step for this kind of problem

The Water heater, no hot water troubleshooter walks through the symptom question by question and ends with a clear next step.

Other A.O. Smith heat pump water heater codes

The full A.O. Smith heat pump water heater code table lists every code with its meaning, and explains how to read and clear them.

Sources

  1. A.O. Smith, Service Handbook - Residential Hybrid Electric Heat Pump Water Heater, incl. fault codes (321547-000) assets.aosmith.com
  2. Noritz, How to troubleshoot a tankless water heater noritz.com